|
磨削工件范围 |
磨削直径
通磨For throughfeed grindingΦ2-Φ40
切入磨For infeed grindingΦ7-Φ40
( 备注：采用特殊托架最小工件直径为0.6mm
) |
|
最大磨削长度
Maximum grinding length with standard
work rest |
|
通磨For
through feed grinding 140mm
切入磨For infeed grinding 120mm |
| 磨削轮规格
Grinding wheel spadifications
PSA350x125x127mm |
| 导轮规格
Regulating wheel specifications
PSA250x125x75mm |
| 磨削轮转速
Grinding wheel speed
1870r/rain |
| 导轮转速
Reguiating wheel speed
10-180r/min.(stepless) |
| 导轮回转角度 垂直面内
Swivellng angle of regulating wheel
ln vertical plane-2°～+4° |
|
水平面内
In horizonfal plane0°～+3° |
| 进给手轮每格进给量
Feed amount per division of the feed handwheel
0.002mm |
| 修整器每格进给量
Feed amount per division of the dresser
0.01mm |
|
砂轮中心连线至托架底面距离
Helght of the centerlines of two wheels
to the bottom
of work-rest 190mm |
| 砂轮中心连线至地面距离
Height of the centerlines of two wheels
to the floor
985mm |
| 机床电机总功率
Power of motors
9kw |
|
磨削轮电机总功率
Grinding wheel motor
7.5kw |
|
机床使用电源
Power supply
3N-50Hz 380V |
| 机床外形尺寸(长X宽X高)
Overall dimensions(Lx Wx H)
1550x1300x1400mm |
|
机床重量 Machine weight(Approx.)
2000kg |
